Model No. CTE-0001
Vacuum-Jacketed Cryogenic Transfer Hose真空夹套低温转移软管
- Inner hose diameter
- DN8–DN15
- Length
- 1–10 m
低温转移设备
Cryogenic Transfer Equipment
低温转移设备
Cryogenic Transfer Equipment — Cryogenic Equipment
Moving liquid nitrogen and frozen samples is where many cryogenic accidents and losses happen. Our transfer equipment covers vacuum-jacketed hoses, phase separators that deliver liquid rather than gas, cryogenic transfer pumps, auto-fill controllers with solenoid valves, and insulated sample transfer carts. Vessel-related parts can reference ISO 21010 for gas compatibility and EN 13458-2 for vacuum-insulated design, with EU PED 2014/68/EU applying to pressure-rated parts.
5 models
Range code CTE
OEM available
Applicable standards
ISO 21010
ISO 21009-1
EN 13458-2
GB/T 18442
EU Pressure Equipment Directive 2014/68/EU
EN 1252-1
How to specify
- Give us hose length, end fittings and supply pressure for a correct match.
- A phase separator reduces splashing and boil-off at the fill point.
- Carts should match your rack height and the corridor and lift widths.
Models in this range
5 models
Model No. CTE-0002
Cryogenic Phase Separator低温相分离器
- Chamber volume
- 0.5–3 L
- Working pressure
- Up to 2 bar
Model No. CTE-0003
Cryogenic Liquid Transfer Pump低温液体转移泵
- Flow rate
- 5–50 L/min
- Differential pressure
- 1–4 bar
Model No. CTE-0004
Liquid Nitrogen Auto-Fill Controller with Solenoid Valve带电磁阀的液氮自动补液控制器
- Controlled vessels
- 1–4
- Level sensor type
- Capacitance or differential pressure
Model No. CTE-0005
Cryogenic Sample Transfer Cart低温样品转运车
- Vessel volume
- 20–70 L
- Sample capacity
- 500–3,000 vials