蛋白质成像系统
Photo for reference; configuration may vary by order.
Model No. PRI-0001 · Protein Analysis Equipment
自动化学发光成像系统
Routine western quantification and treatment comparisons need an imager that sets exposure for you. Its chilled camera, CCD or CMOS at about 4–16 MP, runs at roughly −25 to −60 °C, with 3–4 orders of dynamic range and detection in the low picogram range. Exposures run 0.1 s to 60 min, automatic or manual, over about 150 x 150 mm.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Routine western quantification and treatment comparisons need an imager that sets exposure for you. Its chilled camera, CCD or CMOS at about 4–16 MP, runs at roughly −25 to −60 °C, with 3–4 orders of dynamic range and detection in the low picogram range. Exposures run 0.1 s to 60 min, automatic or manual, over about 150 x 150 mm.
| Parameter | Value |
|---|---|
| Sensor 传感器 | Cooled CCD or CMOS, approx. 4–16 MP |
| Cooling temperature 制冷温度 | approx. −25 to −60 °C |
| Dynamic range 动态范围 | approx. 3–4 orders of magnitude |
| Detection limit 检出限 | low picogram range of protein per band |
| Exposure time 曝光时间 | 0.1 s to 60 min, automatic or manual |
| Imaging area 成像面积 | approx. 150 x 150 mm |
| Resolution 分辨率 | approx. 0.02–0.1 mm per pixel |
| Illumination 照明 | White epi and transillumination for colour markers |
| Software 软件 | Background subtraction, lane profiling, report export |
| Dimensions (W x D x H) 外形尺寸（宽 x 深 x 高） | approx. 400 x 450 x 400 mm |
| Model No. | PRI-0001 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
