灭菌设备
Photo for reference; configuration may vary by order.
Model No. STE-0001 · Microbiology Equipment
台式高压灭菌器
Small micro labs and teaching rooms sterilising media, glassware and modest waste loads can keep it all on the bench. Chambers of 20–50 L reach 105–134 °C at up to 0.22 MPa, and a 121 °C cycle takes about 20–45 minutes including heat-up. Gravity air removal is standard, pre-vacuum optional; a printer or memory log can be added.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Small micro labs and teaching rooms sterilising media, glassware and modest waste loads can keep it all on the bench. Chambers of 20–50 L reach 105–134 °C at up to 0.22 MPa, and a 121 °C cycle takes about 20–45 minutes including heat-up. Gravity air removal is standard, pre-vacuum optional; a printer or memory log can be added.
| Parameter | Value |
|---|---|
| Chamber volume 箱体容积 | 20–50 L |
| Sterilization temperature 灭菌温度 | 105–134 °C selectable |
| Maximum pressure 最高压力 | 0.22 MPa |
| Air removal 排空气方式 | Gravity; pre-vacuum optional |
| Cycle time (121 °C) 循环时间（121 摄氏度） | 20–45 min including heat-up |
| Control 控制方式 | Microprocessor with preset programs |
| Safety 安全功能 | Door interlock, pressure relief, low-water cut-out |
| Data 数据 | Optional printer or memory log |
| Power supply 电源 | 220–240 V, 50/60 Hz |
| Model No. | STE-0001 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
