高压灭菌器
Photo for reference; configuration may vary by order.
Model No. AUT-0002 · Laboratory Sterilization Equipment
台式 B 级真空高压灭菌器
Wrapped packs, hollow handpieces and porous loads need air pulled out before steam can reach them. This benchtop unit runs three fractionated pre-vacuum pulses down to -90 kPa, sterilises at 121 or 134 °C up to 0.23 MPa and dries under vacuum for 10-30 min. Chambers are 16-100 L; a 134 °C unwrapped cycle takes about 25-35 min.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Wrapped packs, hollow handpieces and porous loads need air pulled out before steam can reach them. This benchtop unit runs three fractionated pre-vacuum pulses down to -90 kPa, sterilises at 121 or 134 °C up to 0.23 MPa and dries under vacuum for 10-30 min. Chambers are 16-100 L; a 134 °C unwrapped cycle takes about 25-35 min.
| Parameter | Value |
|---|---|
| Chamber volume 腔体容积 | 16-100 L |
| Sterilization temperature 灭菌温度 | 121 and 134 °C |
| Working pressure 工作压力 | Up to 0.23 MPa |
| Air removal 排气方式 | Fractionated pre-vacuum (3 pulses) |
| Drying 干燥 | Vacuum drying, 10-30 min |
| Vacuum level 真空度 | Down to -90 kPa |
| Chamber material 腔体材质 | SUS316L or 304 stainless steel |
| Cycle time (134 °C, unwrapped) 周期时间（134 °C，未包装） | Approx. 25-35 min |
| Data output 数据输出 | Printer, USB, Ethernet |
| Power supply 电源 | 220 V, 50 Hz, 1.8-3.3 kW |
| Model No. | AUT-0002 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
