Fixed-Speed Tube Rotator固定转速试管旋转器
- Rotation speed
- 20–30 rpm (fixed)
- Rotation angle
- 360° end-over-end
旋转混合器

Photo for reference; configuration may vary by order.
Model No. ROM-0005 · Laboratory Mixers
采血管旋转混合器
Hematology, coagulation and blood bank work need evacuated tubes mixed consistently before analysis. This rotator fits 13 and 16 mm tubes of 75–100 mm length, holds 12–40 tubes, turns 20–40 rpm and alarms at the end of a 1–60 min timer. Holders resist disinfectants. Tell us your tube count per run.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Hematology, coagulation and blood bank work need evacuated tubes mixed consistently before analysis. This rotator fits 13 and 16 mm tubes of 75–100 mm length, holds 12–40 tubes, turns 20–40 rpm and alarms at the end of a 1–60 min timer. Holders resist disinfectants. Tell us your tube count per run.
| Parameter | Value |
|---|---|
| Rotation speed 旋转转速 | 20–40 rpm |
| Tube diameter 试管直径 | 13 and 16 mm |
| Tube length 试管长度 | 75–100 mm |
| Number of positions 位置数 | 12–40 tubes |
| Timer 定时器 | 1–60 min with alarm |
| Motor type 电机类型 | Brushless DC or gear motor |
| Holder material 试管架材料 | Smooth, disinfectant-resistant plastic |
| Maximum load 最大负载 | 1.5 kg |
| Noise level 噪音 | < 50 dB(A) |
| Power supply 供电 | 100–240 V, 50/60 Hz |
| Dimensions (W×D×H) 外形尺寸(宽×深×高) | 340 × 260 × 190 mm |
| Model No. | ROM-0005 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.