集料加速磨光机（PSV）
Photo for reference; configuration may vary by order.
Model No. APM-0001 · Aggregate Testing Equipment
BS EN 1097-8 加速磨光机
European and UK road specifications set minimum PSV values for surfacing stone at bends, junctions and crossings. This machine carries 14 curved specimens on a 406 mm road wheel at 320 ± 5 rpm, polished by a 200 × 50 mm solid tyre under 725 ± 10 N. Corn emery and then flour emery are fed with water for 3 h each.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
European and UK road specifications set minimum PSV values for surfacing stone at bends, junctions and crossings. This machine carries 14 curved specimens on a 406 mm road wheel at 320 ± 5 rpm, polished by a 200 × 50 mm solid tyre under 725 ± 10 N. Corn emery and then flour emery are fed with water for 3 h each.
| Parameter | Value |
|---|---|
| Road wheel diameter 道路轮直径 | 406 mm |
| Specimens per run 每次试件数 | 14 curved specimens |
| Road wheel speed 道路轮转速 | 320 ± 5 rpm |
| Rubber tyre 橡胶轮 | 200 mm dia × 50 mm wide, solid |
| Contact load 接触荷载 | 725 ± 10 N |
| Abrasive feed 磨料供给 | Corn emery then flour emery, with water |
| Run time 试验时间 | 3 h per abrasive stage, timer controlled |
| Power supply 电源 | 380 V, 50 Hz, 3-phase |
| Weight 重量 | Approx. 400 kg |
| Model No. | APM-0001 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
