Liquid-Based Cytology Processor液基细胞学处理机
- Samples per run
- 1–48 vials
- Spot diameter
- about 13–20 mm
细胞学处理机

Photo for reference; configuration may vary by order.
Model No. CYP-0005 · Cytology Equipment
离心式细胞学处理机
Low-cellularity CSF, effusions and FNA rinses need high cell recovery more than batch size. This processor uses density gradient or differential spinning at 200–3000 rpm, finishing in about 5–20 min from as little as 0.2–1 mL. Cells are concentrated into a 6–13 mm spot on a standard slide.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Low-cellularity CSF, effusions and FNA rinses need high cell recovery more than batch size. This processor uses density gradient or differential spinning at 200–3000 rpm, finishing in about 5–20 min from as little as 0.2–1 mL. Cells are concentrated into a 6–13 mm spot on a standard slide.
| Parameter | Value |
|---|---|
| Separation principle 分离原理 | Density gradient or differential spin |
| Spin speed 转速 | 200–3000 rpm |
| Cycle time 循环时间 | about 5–20 min |
| Minimum sample volume 最小样本体积 | about 0.2–1 mL |
| Spot diameter 点样直径 | about 6–13 mm |
| Cell recovery 细胞回收率 | High for low-cellularity fluids |
| Slide format 玻片规格 | 25 × 75 mm standard |
| Power supply 电源 | 220 V, 50 Hz, about 0.3 kW |
| Model No. | CYP-0005 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.