蒸汽灭菌器
Photo for reference; configuration may vary by order.
Model No. STS-0004 · Laboratory Sterilization Equipment
连续培养基灭菌系统
Fermentation and cell culture plants sterilising media at scale gain speed and gentler heat treatment from continuous flow. This system handles 50-5,000 L/h, holding 121-140 °C for 30-120 s with ±0.5 °C control, then cooling to 20-40 °C. Regenerative plate, spiral or coil exchangers recover 60-85 percent of the heat; wetted parts are SUS316L.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Fermentation and cell culture plants sterilising media at scale gain speed and gentler heat treatment from continuous flow. This system handles 50-5,000 L/h, holding 121-140 °C for 30-120 s with ±0.5 °C control, then cooling to 20-40 °C. Regenerative plate, spiral or coil exchangers recover 60-85 percent of the heat; wetted parts are SUS316L.
| Parameter | Value |
|---|---|
| Flow rate 处理量 | 50-5,000 L/h |
| Hold temperature 保持温度 | 121-140 °C |
| Hold time 保持时间 | 30-120 s |
| Heat exchanger type 换热器类型 | Plate, spiral or coil with regenerative section |
| Outlet temperature 出口温度 | Cooled to 20-40 °C |
| Heat recovery 热回收率 | 60-85 percent |
| Wetted material 接触材质 | SUS316L stainless steel |
| Temperature control 温度控制 | ±0.5 °C at hold outlet |
| CIP/SIP 在位清洗/灭菌 | Integrated circuits with steam and caustic |
| Control system 控制系统 | PLC with trend recording and alarms |
| Model No. | STS-0004 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
