塑料密度测试仪
Photo for reference; configuration may vary by order.
Model No. DET-0002 · Plastic Analysis Equipment
塑料密度梯度柱
Polyolefin crystallinity studies and quench or anneal process work need density differences smaller than an immersion balance can see. A column about 1000 mm tall, held to ±0.05 °C and calibrated with certified glass floats, reaches about ±0.0002 g/cm³ over a typical 0.850–1.100 g/cm³ range. Specimens can be as small as about 5 mg.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Polyolefin crystallinity studies and quench or anneal process work need density differences smaller than an immersion balance can see. A column about 1000 mm tall, held to ±0.05 °C and calibrated with certified glass floats, reaches about ±0.0002 g/cm³ over a typical 0.850–1.100 g/cm³ range. Specimens can be as small as about 5 mg.
| Parameter | Value |
|---|---|
| Density range 密度范围 | 0.850–1.100 g/cm³ typical |
| Accuracy 准确度 | About ±0.0002 g/cm³ |
| Temperature control 温度控制 | ±0.05 °C |
| Column height 液柱高度 | About 1000 mm |
| Specimen size 试样尺寸 | From about 5 mg |
| Calibration method 标定方式 | Certified glass floats |
| Column medium 柱内介质 | Aqueous salt or organic liquid pair |
| Settling time 沉降时间 | 10–30 min depending on specimen |
| Power supply 电源 | 220 V, 50/60 Hz |
| Model No. | DET-0002 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
