Filter-Based Cytology Processor滤膜法细胞学处理机
- Membrane pore size
- 5–8 µm
- Samples per run
- 1–12
离心甩片机

Photo for reference; configuration may vary by order.
Model No. CYT-0002 · Cytology Equipment
双腔离心甩片机
Two chambers let haematology and cytology benches prepare paired slides, or two patients, in one spin. Each chamber takes 0.1–1 mL, spun at 200–2000 rpm for 1–99 min onto standard 25 × 75 mm slides with 6–13 mm spots. Both lids seal with clips for aerosol control.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Two chambers let haematology and cytology benches prepare paired slides, or two patients, in one spin. Each chamber takes 0.1–1 mL, spun at 200–2000 rpm for 1–99 min onto standard 25 × 75 mm slides with 6–13 mm spots. Both lids seal with clips for aerosol control.
| Parameter | Value |
|---|---|
| Number of chambers 腔体数量 | 2 |
| Spin speed 转速 | 200–2000 rpm |
| Timer range 定时范围 | 1–99 min |
| Spot diameter 点样直径 | about 6–13 mm |
| Sample volume 样本体积 | 0.1–1 mL per chamber |
| Slide format 玻片规格 | 25 × 75 mm standard |
| Aerosol control 气溶胶防护 | Sealed lids with clips |
| Power supply 电源 | 220 V, 50 Hz, about 0.3 kW |
| Model No. | CYT-0002 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.