灰分分析仪
Photo for reference; configuration may vary by order.
Model No. ASA-0004 · Coal Testing Equipment
双能伽马透射在线灰分仪
Mounted over a conveyor, this gauge gives washing and blending operators live ash values every 1–10 s across 5–50 % ash. Belt widths of 800–2000 mm are covered, with an Am-241 or Cs-137 source in shielded housing. Outputs include 4–20 mA, Modbus and Ethernet. Specify belt width, coal top size and your local source licensing route.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Mounted over a conveyor, this gauge gives washing and blending operators live ash values every 1–10 s across 5–50 % ash. Belt widths of 800–2000 mm are covered, with an Am-241 or Cs-137 source in shielded housing. Outputs include 4–20 mA, Modbus and Ethernet. Specify belt width, coal top size and your local source licensing route.
| Parameter | Value |
|---|---|
| Measurement range 测量范围 | 5–50 % ash |
| Accuracy 准确度 | ± 0.5 % absolute typical |
| Update interval 更新间隔 | 1–10 s |
| Source 放射源 | Americium-241 or caesium-137, shielded |
| Belt width 皮带宽度 | 800–2000 mm |
| Coal size 适用粒度 | 0–50 mm typical |
| Outputs 输出 | 4–20 mA, Modbus, Ethernet |
| Ingress protection 防护等级 | IP65 |
| Model No. | ASA-0004 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
