聚合物光谱分析仪
Photo for reference; configuration may vary by order.
Model No. PSP-0003 · Polymer Analysis Equipment
聚合物分析用红外显微成像系统
Gels, black specks and failed multilayer films are too small for a standard ATR accessory. This FTIR microscope resolves features of about 10–20 µm with a liquid-nitrogen-cooled MCT detector and 15× and 32× reflective objectives. Point, line and area mapping run on a stage with about 75 × 50 mm travel.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Gels, black specks and failed multilayer films are too small for a standard ATR accessory. This FTIR microscope resolves features of about 10–20 µm with a liquid-nitrogen-cooled MCT detector and 15× and 32× reflective objectives. Point, line and area mapping run on a stage with about 75 × 50 mm travel.
| Parameter | Value |
|---|---|
| Spatial resolution 空间分辨率 | About 10–20 µm diffraction limited |
| Spectral range 波数范围 | 4000–900 cm⁻¹ (detector limited) |
| Detector 检测器 | Liquid-nitrogen-cooled MCT |
| Mapping modes 成像方式 | Point, line and area mapping |
| Objectives 物镜 | Reflective 15× and 32× |
| Sample stage travel 样品台行程 | 75 × 50 mm typical |
| Window materials 窗片材质 | Barium fluoride, zinc selenide, silicon |
| Section thickness 切片厚度 | 5–20 µm recommended |
| Purge requirement 吹扫要求 | Nitrogen purge for water vapour removal |
| Power supply 电源 | 220 V, 50/60 Hz |
| Model No. | PSP-0003 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
