Welcome to Liquid International — factory-direct lab & training equipment from China

LI-QUID LIQUID INTERNATIONAL 利奎德国际 · Shanghai
Inquiry Basket0

油品分析仪器

Oil Analysis

Model No. OIA-0003 · Oil Testing Equipment

FTIR Oil Condition Analyzer

FTIR 油液状态分析仪

Engine, gearbox and compressor oil programs typically put every sample through FTIR first. This analyzer scans 4000–650 cm-1 at 4 cm-1 resolution with a DTGS detector, returning oxidation, nitration, sulfation, soot, glycol and water in about 30–60 s. Choose an approximately 100 µm transmission cell or ATR; each test uses around 2–3 mL.

Spectral range
4000–650 cm-1
Spectral resolution
4 cm-1
Cell path length
≈ 100 µm (transmission) or ATR
Detector
DTGS
Signal-to-noise ratio
> 20,000:1 (peak-to-peak, 1 min)
Inquiry Now

Packing & Shipping

Place of originChina (dispatched from Shanghai)
BrandLiquid International / OEM on request
Export packingFumigation-free plywood case or reinforced carton
Loading portShanghai / Ningbo (others on request)
Payment termsT/T, L/C at sight (confirmed on quotation)
Trade termsEXW, FOB, CFR, CIF, DAP

Typical export terms — final terms are confirmed on the proforma invoice.

Product Description 产品描述

Engine, gearbox and compressor oil programs typically put every sample through FTIR first. This analyzer scans 4000–650 cm-1 at 4 cm-1 resolution with a DTGS detector, returning oxidation, nitration, sulfation, soot, glycol and water in about 30–60 s. Choose an approximately 100 µm transmission cell or ATR; each test uses around 2–3 mL.

Highlights

  • Six condition parameters reported in about 30–60 s
  • Signal-to-noise above 20,000:1 for clear trend lines
  • Transmission cell near 100 µm or ATR, your choice
  • Small 2–3 mL sample suits high-volume programs

Applications

  • Engine oil condition screening
  • Gearbox and compressor oil monitoring
  • Fuel and glycol contamination detection

Specifications 技术参数

ParameterValue
Spectral range 光谱范围 4000–650 cm-1
Spectral resolution 光谱分辨率 4 cm-1
Cell path length 池光程 ≈ 100 µm (transmission) or ATR
Detector 检测器 DTGS
Signal-to-noise ratio 信噪比 > 20,000:1 (peak-to-peak, 1 min)
Sample volume 样品量 ≈ 2–3 mL
Analysis time 分析时间 ≈ 30–60 s
Parameters reported 报告参数 Oxidation, nitration, sulfation, soot, glycol, water
Power supply 电源 100–240 V AC, 50/60 Hz
Model No.OIA-0003
Place of originChina (dispatched from Shanghai)

Applicable standards 适用标准

ASTM D5185 ASTM D6595 ASTM E2412 ASTM D7889 ASTM D7647 ISO 4406 ASTM D664 ASTM D2896

Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.

Packing & Shipping 包装与运输

Export packing

Fumigation-free plywood case or reinforced carton

Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.

Loading port

Shanghai / Ningbo (others on request)

Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.

Inquiry Now 索取报价

Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.

Products in this inquiry: FTIR Oil Condition Analyzer (OIA-0003)

We reply within 24 hours (Beijing Time, UTC+8). Your details are used only to answer this inquiry.

Related products

5 models

Send your equipment list — receive a formal quotation within 24 hours

Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.