循环泵
Photo for reference; configuration may vary by order.
Model No. CIP-0004 · Laboratory Pumps
浸入式循环器
Turning an existing tank into a precise bath only takes this clamp-on circulator. It immerses 80–150 mm, uses 1–2 kW of heating to reach 100 °C in water (oil allows more) and holds ±0.1–0.5 °C in 5–30 L baths, pumping 5–15 L/min. A programmable controller is optional. Tell us your tank size so we confirm the clamp.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Turning an existing tank into a precise bath only takes this clamp-on circulator. It immerses 80–150 mm, uses 1–2 kW of heating to reach 100 °C in water (oil allows more) and holds ±0.1–0.5 °C in 5–30 L baths, pumping 5–15 L/min. A programmable controller is optional. Tell us your tank size so we confirm the clamp.
| Parameter | Value |
|---|---|
| Temperature range 温度范围 | Ambient to 100 °C, higher with oil |
| Temperature stability 温度稳定性 | ± 0.1–0.5 °C |
| Heating capacity 加热能力 | 1–2 kW |
| Pump flow 泵流量 | 5–15 L/min |
| Bath volume supported 支持浴槽容积 | 5–30 L |
| Immersion depth 浸入深度 | 80–150 mm |
| Controller 控制器 | Digital, programmable option |
| Safety 安全 | Over-temperature and low-level cutout |
| Clamp 夹具 | Adjustable for varied rim sizes |
| Power supply 供电 | 220–240 V, 50/60 Hz |
| Model No. | CIP-0004 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
