水槽单元
Photo for reference; configuration may vary by order.
Model No. SIU-0005 · Laboratory Furniture
实验室杯形水槽
A cup sink drops into a fume hood worktop or small bench to give a drain point for condenser water and minor rinsing. Cups measure 150–250 mm across and 100–150 mm deep, in PP, epoxy or 304 stainless, with a 40 mm outlet to PP DN40 waste.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
A cup sink drops into a fume hood worktop or small bench to give a drain point for condenser water and minor rinsing. Cups measure 150–250 mm across and 100–150 mm deep, in PP, epoxy or 304 stainless, with a 40 mm outlet to PP DN40 waste.
| Parameter | Value |
|---|---|
| Cup diameter 杯体直径 | 150–250 mm |
| Cup depth 杯体深度 | 100–150 mm |
| Material 材质 | PP / epoxy / stainless 304 |
| Outlet size 排水口 | 40 mm |
| Waste pipe 排水管 | PP DN40 |
| Tap type 龙头类型 | Small gooseneck or hood tap |
| Mounting 安装 | Drop-in via worktop cutout |
| Temperature limit 温度上限 | ≈ 80 °C (PP) / 150 °C (epoxy) |
| Flow rate 流量 | ≈ 4–8 L/min |
| Weight 重量 | ≈ 1–4 kg |
| Model No. | SIU-0005 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
