制药总有机碳分析仪
Photo for reference; configuration may vary by order.
Model No. TAN-0004 · Pharmaceutical Analysis Equipment
清洁验证实验室总有机碳分析仪
Cleaning validation needs TOC on rinse water and swab extracts, with recovery proven per surface and analyte. This analyzer covers 0.001–100 mg/L, detects near 0.001 mg/L by UV persulfate or combustion and keeps carryover low with rinses between samples. Each analysis takes about 4–10 min.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Cleaning validation needs TOC on rinse water and swab extracts, with recovery proven per surface and analyte. This analyzer covers 0.001–100 mg/L, detects near 0.001 mg/L by UV persulfate or combustion and keeps carryover low with rinses between samples. Each analysis takes about 4–10 min.
| Parameter | Value |
|---|---|
| Measuring range 测量范围 | 0.001–100 mg/L |
| Limit of detection 检测限 | about 0.001 mg/L |
| Oxidation principle 氧化原理 | UV persulfate or combustion |
| Sample types 样品类型 | Rinse water and swab extract |
| Swab recovery 擦拭回收率 | Validated per surface and analyte |
| Carryover 携带污染 | Low, with rinse between samples |
| Analysis time 分析时间 | about 4–10 min per sample |
| Power supply 电源 | 220 V, 50 Hz, about 0.3 kW |
| Model No. | TAN-0004 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
