台式离心机
Photo for reference; configuration may vary by order.
Model No. BEC-0001 · Laboratory Centrifuges
低速台式离心机
Small clinics, teaching labs and point-of-care sites separating serum or urine sediment need a reliable, quiet low-speed centrifuge. This model spins at 4,000–5,000 rpm for 2,500–4,200 x g, holding 4 x 100 mL or 24 x 10 mL tubes. Speed accuracy is ±20 rpm, the timer runs 1–99 min and noise stays at or below 60 dB(A). Power is 220 V.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Small clinics, teaching labs and point-of-care sites separating serum or urine sediment need a reliable, quiet low-speed centrifuge. This model spins at 4,000–5,000 rpm for 2,500–4,200 x g, holding 4 x 100 mL or 24 x 10 mL tubes. Speed accuracy is ±20 rpm, the timer runs 1–99 min and noise stays at or below 60 dB(A). Power is 220 V.
| Parameter | Value |
|---|---|
| Maximum speed 最高转速 | 4,000–5,000 rpm |
| Maximum RCF 最大离心力 | 2,500–4,200 x g |
| Maximum capacity 最大容量 | 4 x 100 mL or 24 x 10 mL |
| Speed accuracy 转速精度 | ±20 rpm |
| Timer range 计时范围 | 1–99 min |
| Temperature control 温度控制 | Ambient (none) |
| Noise level 噪声 | ≤ 60 dB(A) |
| Power supply 电源 | 220 V, 50/60 Hz, 200–300 W |
| Dimensions (W x D x H) 外形尺寸（宽 x 深 x 高） | approx. 400 x 450 x 280 mm |
| Model No. | BEC-0001 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
