馏程测定仪
Photo for reference; configuration may vary by order.
Model No. DTE-0001 · Petroleum Testing Equipment
石油产品手动常压蒸馏装置
Teaching labs and sites with occasional kerosene, diesel or naphtha checks can run ASTM D86, ISO 3405 and GB/T 6536 manually at modest cost. The operator sets the 0–1000 W heater, watches the 125 mL flask and reads distillate in a 100 mL cylinder with 1 mL divisions. Condenser bath uses ice or refrigeration from 0 to 60 °C.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Teaching labs and sites with occasional kerosene, diesel or naphtha checks can run ASTM D86, ISO 3405 and GB/T 6536 manually at modest cost. The operator sets the 0–1000 W heater, watches the 125 mL flask and reads distillate in a 100 mL cylinder with 1 mL divisions. Condenser bath uses ice or refrigeration from 0 to 60 °C.
| Parameter | Value |
|---|---|
| Test method 试验方法 | ASTM D86 manual, ISO 3405, GB/T 6536 |
| Sample volume 试样体积 | 100 mL |
| Temperature range 温度范围 | 0–400 °C |
| Flask volume 烧瓶容积 | 125 mL |
| Receiver 接收器 | 100 mL graduated cylinder, 1 mL divisions |
| Condenser bath 冷凝浴 | Ice or refrigerated, 0–60 °C |
| Heater power 加热功率 | 0–1000 W adjustable |
| Temperature resolution 温度分辨率 | 0.1 °C |
| Power supply 电源 | 220 V, 50 Hz |
| Model No. | DTE-0001 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
