维卡仪
Photo for reference; configuration may vary by order.
Model No. VIC-0001 · Cement & Mortar Testing Equipment
手动维卡仪（EN/ASTM型）
Every cement lab needs a dependable manual Vicat frame for consistency and setting-time checks. This unit has a 300 ± 1 g moving rod, a Ø 10 mm consistency plunger and Ø 1.13 mm initial and final set needles reading on a 0–70 mm scale. The conical ring mould and 100 × 100 mm glass plate are supplied, so testing can start the day it arrives.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Every cement lab needs a dependable manual Vicat frame for consistency and setting-time checks. This unit has a 300 ± 1 g moving rod, a Ø 10 mm consistency plunger and Ø 1.13 mm initial and final set needles reading on a 0–70 mm scale. The conical ring mould and 100 × 100 mm glass plate are supplied, so testing can start the day it arrives.
| Parameter | Value |
|---|---|
| Moving rod mass 滑动杆质量 | 300 ± 1 g |
| Consistency plunger 试杆 | Ø 10 ± 0.05 mm, 50 mm long |
| Initial set needle 初凝针 | Ø 1.13 ± 0.05 mm, 50 mm long |
| Final set needle 终凝针 | Ø 1.13 mm with 5 mm annular attachment |
| Scale 标尺 | 0–70 mm, 1 mm divisions |
| Conical ring mould 截锥圆模 | Top Ø 70 mm, bottom Ø 80 mm, height 40 mm |
| Base plate 底板 | Glass, 100 × 100 × 5 mm |
| Frame material 机架材质 | Cast iron, epoxy painted |
| Weight 重量 | Approx. 5 kg |
| Compliance 符合标准 | BS EN 196-3, ASTM C187, ASTM C191 |
| Model No. | VIC-0001 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
