超高效液相色谱仪
Photo for reference; configuration may vary by order.
Model No. UHP-0004 · Chromatography Instruments
微流量超高效液相色谱系统
When sample is scarce or the detector is a mass spectrometer, dropping to micro-flow raises sensitivity and cuts solvent use. This UHPLC runs 1–100 µL/min at 60–100 MPa with dwell volume of ≤20 µL, suits 0.3–1.0 mm ID columns and injects 0.1–5 µL. Proteomics, PK bioanalysis and microsampling are typical uses. Tell us your MS source.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
When sample is scarce or the detector is a mass spectrometer, dropping to micro-flow raises sensitivity and cuts solvent use. This UHPLC runs 1–100 µL/min at 60–100 MPa with dwell volume of ≤20 µL, suits 0.3–1.0 mm ID columns and injects 0.1–5 µL. Proteomics, PK bioanalysis and microsampling are typical uses. Tell us your MS source.
| Parameter | Value |
|---|---|
| Flow rate range 流量范围 | 1–100 µL/min |
| Maximum operating pressure 最大工作压力 | 60–100 MPa (600–1000 bar) |
| Flow precision (RSD) 流量精密度（RSD） | ≤0.2% |
| Dwell volume 滞留体积 | ≤20 µL |
| Gradient composition accuracy 梯度组成准确度 | ±1% absolute |
| Column internal diameter 色谱柱内径 | 0.3–1.0 mm |
| Injection volume 进样体积 | 0.1–5 µL |
| Injection carryover 进样残留 | ≤0.01% |
| Column oven range 柱温箱范围 | 5–80 °C |
| Tubing internal diameter 管路内径 | 25–50 µm |
| Model No. | UHP-0004 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
