油液状态监测设备
Photo for reference; configuration may vary by order.
Model No. OCM-0004 · Oil Testing Equipment
多参数在线油品质量传感器
OEMs building oil health monitoring into engines, gearboxes or hydraulic packs can get several readings from one probe. It measures viscosity over 1–1000 mPa·s at ±5 % of reading, density from 0.7 to 1.2 g/cm³ and dielectric constant from 1.5 to 6, responding in about 1–10 s. The unit handles −40 to 150 °C and 100 bar, with output over CAN bus, Modbus or a 4–20 mA loop.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
OEMs building oil health monitoring into engines, gearboxes or hydraulic packs can get several readings from one probe. It measures viscosity over 1–1000 mPa·s at ±5 % of reading, density from 0.7 to 1.2 g/cm³ and dielectric constant from 1.5 to 6, responding in about 1–10 s. The unit handles −40 to 150 °C and 100 bar, with output over CAN bus, Modbus or a 4–20 mA loop.
| Parameter | Value |
|---|---|
| Viscosity range 黏度范围 | 1–1000 mPa·s |
| Viscosity accuracy 黏度准确度 | ± 5 % of reading |
| Density range 密度范围 | 0.7–1.2 g/cm³ |
| Dielectric constant range 介电常数范围 | 1.5–6 |
| Temperature range 温度范围 | −40 to 150 °C |
| Operating pressure 工作压力 | ≤ 100 bar |
| Response time 响应时间 | ≈ 1–10 s |
| Output 输出 | CAN, Modbus, 4–20 mA |
| Supply voltage 供电电压 | 9–32 V DC |
| Model No. | OCM-0004 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
