橡胶加工分析仪
Photo for reference; configuration may vary by order.
Model No. RPA-0003 · Rubber Analysis Equipment
生产质控用多工位橡胶加工分析仪
Mixing plants that want dynamic data on every batch, not just cure times, can run 2 to 4 RPA stations in parallel. Each cavity takes about 4.5 cm³ and runs to 200 °C at strains of 0.1–50% and 0.01–20 Hz. Results arrive as a combined table with station numbers and curves.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Mixing plants that want dynamic data on every batch, not just cure times, can run 2 to 4 RPA stations in parallel. Each cavity takes about 4.5 cm³ and runs to 200 °C at strains of 0.1–50% and 0.01–20 Hz. Results arrive as a combined table with station numbers and curves.
| Parameter | Value |
|---|---|
| Number of stations 工位数 | 2–4 |
| Temperature range 温度范围 | Ambient to 200 °C per station |
| Temperature accuracy 温度准确度 | ±0.3 °C |
| Strain range 应变范围 | 0.1–50% |
| Frequency range 频率范围 | 0.01–20 Hz |
| Specimen volume 试样体积 | About 4.5 cm³ per cavity |
| Throughput 处理能力 | Up to 4 tests in parallel |
| Data output 数据输出 | Combined table with station number and curves |
| Model No. | RPA-0003 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
