Model No. GCM-0001
Single Quadrupole GC-MS System单四极杆气质联用仪
- Mass range
- m/z 1.6–1050
- Scan speed
- up to 10000 Da/s
气相色谱质谱联用仪
GC-MS
Photo for reference; configuration may vary by order.
Model No. GCM-0005 · Mass Spectrometry Instruments
Pyrolysis GC-MS System
裂解气质联用仪
Polymers, rubbers, microplastics and paint chips can be identified without solvent extraction by heating them straight into a GC-MS. This pyrolyser reaches 1050 °C with ±1 °C reproducibility, needs only 10–500 µg and supports single-shot, multi-shot, EGA and reactive pyrolysis modes. A 48–80 position autosampler handles batches. Tell us your material types.
- Pyrolysis temperature range
- ambient to 1050 °C (furnace)
- Temperature reproducibility
- ±1 °C
- Sample amount
- 10–500 µg
- Autosampler capacity
- 48–80 samples
- Interface temperature
- up to 400 °C
Packing & Shipping
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Product Description 产品描述
Polymers, rubbers, microplastics and paint chips can be identified without solvent extraction by heating them straight into a GC-MS. This pyrolyser reaches 1050 °C with ±1 °C reproducibility, needs only 10–500 µg and supports single-shot, multi-shot, EGA and reactive pyrolysis modes. A 48–80 position autosampler handles batches. Tell us your material types.
Highlights
- Microgram samples, no solvent preparation
- Four operating modes for additives and polymer backbones
- Autosampler for unattended batches
- Identifies microplastics in environmental samples
Applications
- Polymer identification and copolymer composition
- Microplastics identification in environmental samples
- Forensic analysis of paint, fibers and tape
- Rubber and elastomer characterization
- Additives and residual monomer in plastics
Specifications 技术参数
| Parameter | Value |
|---|---|
| Pyrolysis temperature range 裂解温度范围 | ambient to 1050 °C (furnace) |
| Temperature reproducibility 温度重现性 | ±1 °C |
| Sample amount 样品量 | 10–500 µg |
| Autosampler capacity 自动进样器容量 | 48–80 samples |
| Interface temperature 接口温度 | up to 400 °C |
| Mass range (MS) 质量范围（MS） | m/z 1.6–1050 |
| Scan speed (MS) 扫描速度（MS） | up to 10000 Da/s |
| Operating modes 运行模式 | Single-shot, multi-shot, EGA, reactive pyrolysis |
| Heating rate 升温速率 | up to 20 °C/ms (Curie-point models) |
| Carrier gas 载气 | Helium, 99.999% |
| Model No. | GCM-0005 |
| Place of origin | China (dispatched from Shanghai) |
Applicable standards 适用标准
EPA Method 8270
EPA Method 524.2
EPA Method 8260
ASTM D5769
USP <467> Residual Solvents
ISO 11423
EN 15662
ISO/IEC 17025
IEC 61010-1
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Packing & Shipping 包装与运输
Export packing
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Loading port
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Inquiry Now 索取报价
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Related products
5 models
Model No. GCM-0002
GC-Triple Quadrupole MS (GC-MS/MS) System气相色谱三重四极杆串联质谱仪（GC-MS/MS）
- Mass range
- m/z 1.2–1200
- Minimum MRM dwell time
- 1 ms
Model No. GCM-0003
GC-TOF MS System气相色谱飞行时间质谱仪（GC-TOF MS）
- Mass range
- m/z 10–1500
- Acquisition rate
- up to 500 spectra/s
Model No. GCM-0004
Headspace GC-MS System顶空气质联用仪
- Vial capacity
- 10, 20 or 22 mL; 12–120 positions
- Oven temperature range
- ambient +10 to 300 °C
Model No. LCM-0001
Single Quadrupole LC-MS System单四极杆液质联用仪
- Mass range
- m/z 50–2000
- Mass resolution
- Unit (0.7 u FWHM)