洁净工作台（层流柜）
Photo for reference; configuration may vary by order.
Model No. CBE-0004 · Laminar Flow Cabinets
再循环式洁净工作台
No duct, quick installation and minimal impact on room air conditioning: this clean bench recirculates about 90% with a small bleed. Horizontal or vertical H14 HEPA flow runs at 0.3 to 0.5 m/s behind a washable G4 pre-filter. Widths run 900–1800 mm.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
No duct, quick installation and minimal impact on room air conditioning: this clean bench recirculates about 90% with a small bleed. Horizontal or vertical H14 HEPA flow runs at 0.3 to 0.5 m/s behind a washable G4 pre-filter. Widths run 900–1800 mm.
| Parameter | Value |
|---|---|
| Flow direction 气流方向 | Horizontal or vertical |
| Filter class 过滤器等级 | HEPA H14, ≥ 99.97 % at 0.3 µm |
| Face velocity 面风速 | 0.3–0.5 m/s |
| Recirculation 再循环 | ≈ 90 % with bleed |
| Exhaust 排风 | None, room make-up and bleed |
| Width 宽度 | 900–1800 mm |
| Work surface 台面 | Stainless steel 304 |
| Pre-filter 初效过滤器 | Washable, G4 |
| Noise level 噪声 | ≤ 62 dB(A) |
| Power supply 电源 | 220 V, 50 Hz, 200–400 W |
| Model No. | CBE-0004 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
