样品处理设备
Photo for reference; configuration may vary by order.
Model No. SAP-0004 · Life Science Equipment
冷冻高速微型离心机
Every molecular bench needs a cold microcentrifuge for extractions and lysate clean-up. The standard rotor carries 24 tubes (1.5 or 2.0 mL) at 15,000–16,000 rpm, up to 21,000 × g, while the chamber holds −10 to +40 °C within ±1 °C. Nine acceleration and nine braking profiles protect pellets, and it runs below 60 dB(A).
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Every molecular bench needs a cold microcentrifuge for extractions and lysate clean-up. The standard rotor carries 24 tubes (1.5 or 2.0 mL) at 15,000–16,000 rpm, up to 21,000 × g, while the chamber holds −10 to +40 °C within ±1 °C. Nine acceleration and nine braking profiles protect pellets, and it runs below 60 dB(A).
| Parameter | Value |
|---|---|
| Maximum speed 最高转速 | 15,000–16,000 rpm |
| Maximum RCF 最大相对离心力 | up to 21,000 × g |
| Standard rotor capacity 标准转子容量 | 24 × 1.5/2.0 mL |
| Temperature range 温度范围 | −10 to +40 °C |
| Temperature accuracy 温度精度 | ±1 °C |
| Timer range 定时范围 | 10 s–99 min, plus continuous |
| Acceleration/braking profiles 加减速曲线 | 9 each |
| Noise level 噪声水平 | below 60 dB(A) |
| Refrigerant 制冷剂 | R134a or R290 |
| Power supply 电源 | 220–240 V, 50/60 Hz, approx. 600 W |
| Model No. | SAP-0004 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
