轮转式切片机
Photo for reference; configuration may vary by order.
Model No. RMI-0002 · Histology Equipment
半自动轮转式切片机
Motor-assisted cutting at 100–400 mm/s eases the strain of long sessions while the operator keeps manual feel. Section thickness is set between 1 and 60 µm at 1 µm increments, trimming at 10 or 30 µm, on specimens up to about 55 × 45 mm with a stroke of about 65 mm. It suits busy surgical pathology and IHC preparation.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Motor-assisted cutting at 100–400 mm/s eases the strain of long sessions while the operator keeps manual feel. Section thickness is set between 1 and 60 µm at 1 µm increments, trimming at 10 or 30 µm, on specimens up to about 55 × 45 mm with a stroke of about 65 mm. It suits busy surgical pathology and IHC preparation.
| Parameter | Value |
|---|---|
| Section thickness range 切片厚度范围 | 1–60 µm |
| Thickness increment 厚度增量 | 1 µm |
| Cutting speed 切割速度 | 100–400 mm/s |
| Trimming feed 修块进给 | 10 µm and 30 µm |
| Maximum specimen size 最大标本尺寸 | about 55 × 45 mm |
| Specimen stroke 标本行程 | about 65 mm |
| Retraction 回缩 | about 60 µm per stroke |
| Blade type 刀片类型 | Disposable low-profile or high-profile |
| Power supply 电源 | 220 V, 50 Hz, about 0.2 kW |
| Model No. | RMI-0002 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
