混凝土抗折试验机
Concrete Flexural Testing Machines
Photo being updated
Photo for reference; configuration may vary by order.
Model No. FTM-0003 · Concrete Testing Equipment
Servo Flexural Test System for Fibre-Reinforced Concrete 300 kN
纤维混凝土伺服抗折试验系统 300 kN
Fibre concrete is specified by how much load it carries after cracking, which only a stiff servo frame under deflection control can capture. This 300 kN system runs in load, displacement or CMOD control, with two LVDTs on a yoke reading ±5 mm to 0.001 mm. Software logs at up to 100 Hz and reports residual strength and toughness.
- Maximum capacity
- 300 kN
- Control
- Closed-loop servo, load, displacement or CMOD
- Deflection measurement
- Two LVDTs on yoke, ±5 mm, 0.001 mm
- CMOD gauge
- Clip gauge, 0–5 mm
- Data rate
- Up to 100 Hz
Packing & Shipping
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Product Description 产品描述
Fibre concrete is specified by how much load it carries after cracking, which only a stiff servo frame under deflection control can capture. This 300 kN system runs in load, displacement or CMOD control, with two LVDTs on a yoke reading ±5 mm to 0.001 mm. Software logs at up to 100 Hz and reports residual strength and toughness.
Highlights
- Load, displacement or CMOD control
- Twin LVDTs, 0.001 mm resolution
- Notched-beam and third-point fixtures
- Residual strength and toughness reports
Applications
- Steel and synthetic fibre concrete
- Residual flexural strength
- Shotcrete toughness studies
- Fibre dosage optimisation
Specifications 技术参数
| Parameter | Value |
|---|---|
| Maximum capacity 最大试验力 | 300 kN |
| Control 控制方式 | Closed-loop servo, load, displacement or CMOD |
| Deflection measurement 挠度测量 | Two LVDTs on yoke, ±5 mm, 0.001 mm |
| CMOD gauge 裂口张开位移计 | Clip gauge, 0–5 mm |
| Data rate 采样频率 | Up to 100 Hz |
| Fixtures 试验夹具 | Third-point and notched-beam three-point |
| Software 软件 | Load-deflection curves, residual strength and toughness |
| Power 电源 | 380 V, 50 Hz, 3-phase, 2.2 kW |
| Weight 重量 | Approx. 1400 kg |
| Model No. | FTM-0003 |
| Place of origin | China (dispatched from Shanghai) |
Applicable standards 适用标准
ASTM C78
ASTM C293
ASTM C1609
AASHTO T 97
BS EN 12390-5
IS 516
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Packing & Shipping 包装与运输
Export packing
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Loading port
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Inquiry Now 索取报价
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Related products
6 models
Model No. FTM-0001
Manual Hydraulic Flexural Testing Machine 100 kN手动液压混凝土抗折试验机 100 kN
- Maximum capacity
- 100 kN
- Load indication
- Analogue gauge with peak pointer
Model No. FTM-0002
Digital Automatic Flexural Testing Machine 150 kN数显全自动混凝土抗折试验机 150 kN
- Maximum capacity
- 150 kN
- Control
- Automatic stress-rate control
Model No. FTM-0004
Flexure Attachment for Compression Testing Machines压力试验机用抗折试验附件
- Rated load
- 100 kN
- Loading arrangement
- Third-point, Ø 30 mm rollers
Model No. FTM-0005
Electro-Mechanical Flexural Testing Machine 50 kN for Small Beams电子式小梁抗折试验机 50 kN
- Maximum capacity
- 50 kN
- Drive
- Servo motor and ball screw