防水卷材试验仪
Photo for reference; configuration may vary by order.
Model No. WMT-0001 · Building Materials Testing Equipment
三工位防水卷材不透水仪
Every membrane production lot needs proof that it will not pass water under pressure. Three cells clamp Ø 150 mm discs over a Ø 130 mm test area and hold pressure up to 1.0 MPa at ±1% of full scale. A motor pump and accumulator keep each cell steady for 0–999 min, and a 7-slot disc is supplied for the high-pressure method.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Every membrane production lot needs proof that it will not pass water under pressure. Three cells clamp Ø 150 mm discs over a Ø 130 mm test area and hold pressure up to 1.0 MPa at ±1% of full scale. A motor pump and accumulator keep each cell steady for 0–999 min, and a 7-slot disc is supplied for the high-pressure method.
| Parameter | Value |
|---|---|
| Test cells 试验工位 | 3 |
| Pressure range 压力范围 | 0–1.0 MPa |
| Pressure accuracy 压力精度 | ±1% of full scale |
| Specimen size 试样尺寸 | Ø 150 mm discs |
| Test area 试验面积 | Ø 130 mm |
| Slotted disc 开缝透水盘 | 7-slot plate for high-pressure method |
| Hold time 保压时间 | 0–999 min, automatic |
| Pressure source 压力源 | Motor pump with accumulator |
| Power supply 电源 | 220 V, 50 Hz |
| Standards 执行标准 | BS EN 1928 |
| Model No. | WMT-0001 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
