CO2 培养箱
Photo for reference; configuration may vary by order.
Model No. CON-0004 · Cell Culture Equipment
三气低氧 CO2 培养箱
Stem cells, embryos and tumour spheroids often behave more naturally at physiological oxygen. By injecting nitrogen, this incubator sets oxygen anywhere from 0.1% to 21%, holding within ±0.2% at low set points while CO2 stays at 5%. Specify zirconia or electrochemical sensing, and whether you will feed separate CO2 and N2 or premixed gas.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Stem cells, embryos and tumour spheroids often behave more naturally at physiological oxygen. By injecting nitrogen, this incubator sets oxygen anywhere from 0.1% to 21%, holding within ±0.2% at low set points while CO2 stays at 5%. Specify zirconia or electrochemical sensing, and whether you will feed separate CO2 and N2 or premixed gas.
| Parameter | Value |
|---|---|
| Oxygen range 氧浓度范围 | 0.1–21% |
| Oxygen control accuracy 氧控制准确度 | within ±0.2% at low set points |
| CO2 range CO2 范围 | 0–20%, controlled at 5% |
| Temperature range 温度范围 | ambient +5 to 50 °C, set at 37 °C |
| Oxygen sensor 氧传感器 | Zirconia or electrochemical, calibration every 1–3 months |
| Gas supply 气体供应 | CO2 and nitrogen, or premixed triple gas |
| Chamber volume 腔体容积 | 100–200 L |
| Humidity 湿度 | above 90% relative humidity |
| Recovery after door opening 开门后恢复 | approx. 5–15 min for oxygen set point |
| Dimensions (W x D x H) 外形尺寸（宽 x 深 x 高） | approx. 650 x 700 x 950 mm |
| Model No. | CON-0004 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
