高氯酸通风柜
Photo for reference; configuration may vary by order.
Model No. PAH-0002 · Fume Hoods
步入式高氯酸通风柜
Geological and environmental labs digesting large composites with perchloric acid can use this walk-in hood. It is built in PP or 316L, 2000–2500 mm tall and up to 2400 mm wide, with a 5–15 min washdown covering the full interior and duct. Airflow is 1000–2500 m3/h.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Geological and environmental labs digesting large composites with perchloric acid can use this walk-in hood. It is built in PP or 316L, 2000–2500 mm tall and up to 2400 mm wide, with a 5–15 min washdown covering the full interior and duct. Airflow is 1000–2500 m3/h.
| Parameter | Value |
|---|---|
| Body material 柜体材质 | Polypropylene or 316L stainless |
| Height 高度 | 2000–2500 mm |
| Width 宽度 | 1500–2400 mm |
| Depth 深度 | 900–1500 mm |
| Face velocity 面风速 | 0.4–0.6 m/s |
| Airflow 风量 | 1000–2500 m3/h |
| Washdown cycle 冲洗循环 | 5–15 min, full interior and duct |
| Floor 地面 | Stainless steel or ceramic |
| Sash 视窗 | Full-height with interlock |
| Drainage 排水 | Dedicated waste line with trap |
| Model No. | PAH-0002 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
