塑料熔体流动分析仪
Photo for reference; configuration may vary by order.
Model No. MFA-0002 · Plastic Analysis Equipment
带机器人取样的自动熔融指数分析仪
Resin producers releasing high volumes of lots, or running QC overnight, can load 20 to 60 samples into the tray and let the robot do the rest. One or two barrels run at 50–400 °C, each sample takes 15–30 min including preheat, and results go out as CSV, PDF or directly to the laboratory system.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Resin producers releasing high volumes of lots, or running QC overnight, can load 20 to 60 samples into the tray and let the robot do the rest. One or two barrels run at 50–400 °C, each sample takes 15–30 min including preheat, and results go out as CSV, PDF or directly to the laboratory system.
| Parameter | Value |
|---|---|
| Measurement barrels 测量料筒数 | 1 or 2 |
| Temperature range 温度范围 | 50–400 °C |
| Temperature accuracy 温度准确度 | ±0.2 °C |
| Tray capacity 样盘容量 | 20–60 sample positions |
| Cycle time per sample 单样品周期 | 15–30 min including preheat |
| Load weights 负荷砝码 | 1.2 / 2.16 / 5 / 10 / 21.6 kg |
| Balance resolution 天平分度值 | 0.1 mg |
| Data output 数据输出 | CSV, PDF and laboratory system interface |
| Sample form 样品形态 | Granules or pre-weighed portions |
| Power supply 电源 | 380 V, 50 Hz, three-phase |
| Model No. | MFA-0002 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
