Model No. MFA-0001
Gravimetric Melt Flow Rate Analyzer重量法熔体流动速率分析仪
- Temperature range
- 50–400 °C
- Temperature accuracy
- ±0.2 °C
塑料熔体流动分析仪
Melt Flow Analysis
塑料熔体流动分析仪
Melt Flow Analysis — Plastic Analysis Equipment
Plastics plants use melt flow analysis to accept resin, approve regrind ratios and track batch consistency. Beyond gravimetric analysers, we build robotic automated units, multi-position benches, melt density instruments and models for filled or high-viscosity grades. Designs align with ISO 1133-1 and ASTM D1238, with ASTM D3364 available for PVC compounds.
6 models
Range code MFA
OEM available
Applicable standards
ISO 1133-1
ASTM D1238
ASTM D3364
GB/T 3682.1
GB/T 3682.2
IEC 61010-1
How to specify
- Filled and glass-reinforced grades need wear-resistant dies and barrels.
- Robotic handling pays off when daily sample counts are high.
- State whether you report MFR, MVR or melt density on certificates.
Models in this range
6 models
Model No. MFA-0002
Automated Melt Index Analyzer with Robotic Sample Handling带机器人取样的自动熔融指数分析仪
- Measurement barrels
- 1 or 2
- Temperature range
- 50–400 °C
Model No. MFA-0003
Multi-Position Melt Flow Analyzer多工位熔体流动分析仪
- Number of positions
- 2–6
- Temperature range
- 50–400 °C per position
Model No. MFA-0004
Melt Density Analyzer for Thermoplastics热塑性塑料熔体密度测定仪
- Melt density range
- 0.6–1.5 g/cm³ typical
- Displacement resolution
- 0.01 mm
Model No. MFA-0005
Melt Flow Analyzer for Filled and Reinforced Plastics填充与增强塑料熔体流动分析仪
- Die material
- Hardened tool steel or tungsten carbide
- Temperature range
- 50–400 °C
Model No. MFA-0006
High-Load Melt Flow Analyzer for High-Viscosity Plastics高黏度塑料用高负荷熔体流动分析仪
- Available loads
- 10 / 21.6 kg standard, higher on request
- Temperature range
- 50–400 °C