三轴试验系统
Photo for reference; configuration may vary by order.
Model No. TRX-0003 · Soil Testing Equipment
全自动三轴试验系统（UU、CU、CD）
A CD test run by hand can take a technician a full week of adjustments. This system pairs a 50 kN servo frame with two 2 MPa, 200 cc pressure-volume controllers resolving 0.1 kPa and 1 mm³. The software steps through saturation, B-check, consolidation and shear on its own and draws Mohr circles for the report.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
A CD test run by hand can take a technician a full week of adjustments. This system pairs a 50 kN servo frame with two 2 MPa, 200 cc pressure-volume controllers resolving 0.1 kPa and 1 mm³. The software steps through saturation, B-check, consolidation and shear on its own and draws Mohr circles for the report.
| Parameter | Value |
|---|---|
| Load frame 加载架 | 50 kN, servo motor |
| Pressure controllers 压力体积控制器 | Two, 2 MPa, 200 cc each |
| Pressure resolution 压力分辨率 | 0.1 kPa |
| Volume resolution 体积分辨率 | 1 mm³ |
| Transducers 传感器 | Load cell, LVDT, pore pressure transducer |
| Specimen diameters 试样直径 | 38–100 mm |
| Test stages 试验阶段 | Saturation, B-check, consolidation, shear |
| Software 软件 | Automatic stage control, Mohr circles, report |
| Power 电源 | 220 V, 50 Hz |
| Model No. | TRX-0003 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
