包埋机
Photo for reference; configuration may vary by order.
Model No. EMS-0001 · Pathology Equipment
组合式石蜡包埋机
Small histology and veterinary labs can embed with one compact unit of about 500 × 600 × 400 mm. The 3–5 L wax reservoir sits beside a warmed working surface and a –5 to 5 °C chilling plate that takes 20–40 molds, with a tray holding 100–150 cassettes. Dispense by hand lever or foot pedal.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Small histology and veterinary labs can embed with one compact unit of about 500 × 600 × 400 mm. The 3–5 L wax reservoir sits beside a warmed working surface and a –5 to 5 °C chilling plate that takes 20–40 molds, with a tray holding 100–150 cassettes. Dispense by hand lever or foot pedal.
| Parameter | Value |
|---|---|
| Paraffin tank volume 石蜡罐容积 | 3–5 L |
| Paraffin temperature 石蜡温度 | Ambient to 75 °C |
| Work area temperature 工作区温度 | Ambient to 75 °C |
| Cold plate temperature 冷台温度 | –5 to 5 °C |
| Cold plate capacity 冷台容量 | 20–40 molds |
| Cassette tray capacity 托盘容量 | 100–150 cassettes |
| Dispenser control 分配控制 | Hand lever or foot pedal |
| Dimensions (W×D×H) 尺寸（宽×深×高） | about 500 × 600 × 400 mm |
| Power supply 电源 | 220 V, 50 Hz, about 0.8 kW |
| Model No. | EMS-0001 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
