包埋机
Photo for reference; configuration may vary by order.
Model No. EMS-0005 · Pathology Equipment
独立半导体冷台（石蜡蜡块用）
Adding cooling capacity, or completing a dispenser-only setup, is simple with a standalone Peltier plate. It cools to –5 °C in about 10–20 min, holds –10 to 5 °C with ±1 °C stability and takes 30–60 base molds. Running at 50 dB(A) or less, it measures about 400 × 450 × 120 mm.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Adding cooling capacity, or completing a dispenser-only setup, is simple with a standalone Peltier plate. It cools to –5 °C in about 10–20 min, holds –10 to 5 °C with ±1 °C stability and takes 30–60 base molds. Running at 50 dB(A) or less, it measures about 400 × 450 × 120 mm.
| Parameter | Value |
|---|---|
| Plate temperature 冷台温度 | –10 to 5 °C |
| Mold capacity 模具容量 | 30–60 base molds |
| Cooling method 制冷方式 | Peltier thermoelectric |
| Cooling time to –5 °C 降温至 –5 °C 时间 | about 10–20 min |
| Temperature stability 温度稳定性 | ±1 °C |
| Plate material 台面材质 | Stainless steel or aluminum |
| Noise level 噪声 | ≤ 50 dB(A) |
| Dimensions (W×D×H) 尺寸（宽×深×高） | about 400 × 450 × 120 mm |
| Power supply 电源 | 220 V, 50 Hz, about 0.3 kW |
| Model No. | EMS-0005 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
