金属成分分析仪
Photo for reference; configuration may vary by order.
Model No. MET-0002 · Metallurgical Laboratory Equipment
金属碳硫燃烧分析仪
For carbon and sulfur on steel, cast iron and ferroalloy chips, this analyzer burns 0.2–1 g in oxygen with induction heating to 1800–2200 °C and reads CO2 and SO2 on NDIR cells. Ranges reach down to 0.0005 % for both elements, which covers ultra-low-carbon grades. Each result takes 40–90 s.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
For carbon and sulfur on steel, cast iron and ferroalloy chips, this analyzer burns 0.2–1 g in oxygen with induction heating to 1800–2200 °C and reads CO2 and SO2 on NDIR cells. Ranges reach down to 0.0005 % for both elements, which covers ultra-low-carbon grades. Each result takes 40–90 s.
| Parameter | Value |
|---|---|
| Carbon range 碳含量范围 | 0.0005–6 % |
| Sulfur range 硫含量范围 | 0.0005–1 % |
| Sample mass 样品量 | 0.2–1 g chips |
| Furnace temperature 炉温 | Induction, 1800–2200 °C in the crucible |
| Detectors 检测器 | NDIR cells for CO2 and SO2 |
| Analysis time 分析时间 | 40–90 s per sample |
| Oxygen purity 氧气纯度 | ≥ 99.99 % |
| Data output 数据输出 | USB, LAN, LIMS export |
| Model No. | MET-0002 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
