金相与冶金试样制备设备
Photo for reference; configuration may vary by order.
Model No. SAR-0003 · Metallurgical Laboratory Equipment
金属屑样钻取机
Combustion results for C, S, O, N and H go wrong if chips overheat. This drill press runs 100–2000 rpm with 3–12 mm carbide or cobalt HSS drills, producing 1–4 mm chips dry, without coolant. Feed can be a manual lever or motorized; clamping uses a vice or fixture plate.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Combustion results for C, S, O, N and H go wrong if chips overheat. This drill press runs 100–2000 rpm with 3–12 mm carbide or cobalt HSS drills, producing 1–4 mm chips dry, without coolant. Feed can be a manual lever or motorized; clamping uses a vice or fixture plate.
| Parameter | Value |
|---|---|
| Spindle speed 主轴转速 | 100–2000 rpm, variable |
| Drill diameter 钻头直径 | 3–12 mm |
| Drill material 钻头材质 | Tungsten carbide or cobalt HSS |
| Chip size 屑样尺寸 | 1–4 mm typical |
| Feed control 进给控制 | Manual lever or motorized |
| Sample clamping 样品夹紧 | Vice or fixture plate |
| Cooling 冷却 | No coolant, dry cutting preferred |
| Power supply 电源 | 380 V, 50/60 Hz, three phase |
| Model No. | SAR-0003 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
