发酵罐体
Photo for reference; configuration may vary by order.
Model No. FET-0002 · Fermentation Equipment
锥形发酵罐
Brewers and yeast propagation plants rely on cone-bottom tanks so solids collect for easy cropping. We build 100–10,000 hL tanks in 316L with 60–75 degree cones and Ra below 0.8 µm. The cylinder is jacketed, with a cone jacket optional, and fittings cover racking, sampling, relief and cleaning. Design pressure is 0.1–0.3 MPa.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Brewers and yeast propagation plants rely on cone-bottom tanks so solids collect for easy cropping. We build 100–10,000 hL tanks in 316L with 60–75 degree cones and Ra below 0.8 µm. The cylinder is jacketed, with a cone jacket optional, and fittings cover racking, sampling, relief and cleaning. Design pressure is 0.1–0.3 MPa.
| Parameter | Value |
|---|---|
| Volume 容积 | 100–10,000 hL |
| Cone angle 锥角 | 60–75 degrees |
| Material 材质 | 316L stainless steel |
| Design pressure 设计压力 | 0.1–0.3 MPa |
| Cooling 冷却 | Jacketed cylinder, cone jacket optional |
| Surface finish 表面粗糙度 | Ra below 0.8 µm (product contact) |
| Access 检修口 | Top manway or hatch |
| Fittings 接口 | Racking, sampling, relief and cleaning |
| Model No. | FET-0002 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
