Mini Vertical Gel Electrophoresis System小型垂直凝胶电泳系统
- Gel size
- approx. 80 x 80 mm
- Gel thickness
- 0.75–1.5 mm
蛋白质纯化系统

Photo for reference; configuration may vary by order.
Model No. PRP-0001 · Protein Analysis Equipment
快速蛋白质液相层析系统
Method development for recombinant proteins and antibodies usually starts on a compact FPLC. This system pumps 0.1–20 mL/min at about 2–5 MPa by model, with ±1% gradient accuracy, UV at 280 nm (214 and 260 nm selectable) and 0.01–100 mS/cm conductivity. It suits columns of about 1–50 mL, with interchangeable 0.5–50 mL loops and up to 96 fractions.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Method development for recombinant proteins and antibodies usually starts on a compact FPLC. This system pumps 0.1–20 mL/min at about 2–5 MPa by model, with ±1% gradient accuracy, UV at 280 nm (214 and 260 nm selectable) and 0.01–100 mS/cm conductivity. It suits columns of about 1–50 mL, with interchangeable 0.5–50 mL loops and up to 96 fractions.
| Parameter | Value |
|---|---|
| Flow rate range 流速范围 | 0.1–20 mL/min |
| Maximum pressure 最高压力 | approx. 2–5 MPa (model dependent) |
| Gradient accuracy 梯度准确度 | within ±1% (typical) |
| UV wavelength 紫外波长 | 280 nm standard, 214 and 260 nm selectable |
| Conductivity range 电导范围 | 0.01–100 mS/cm |
| Column volume range 色谱柱体积范围 | approx. 1–50 mL |
| Fraction collector 馏分收集器 | up to 96 fractions or multi-well plate |
| Sample loop volume 样品环体积 | 0.5–50 mL (interchangeable) |
| Software 软件 | Method editor with run log and audit trail |
| Dimensions (W x D x H) 外形尺寸(宽 x 深 x 高) | approx. 500 x 500 x 500 mm |
| Model No. | PRP-0001 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.