瓷砖抗折强度试验机
Photo for reference; configuration may vary by order.
Model No. TFS-0005 · Building Materials Testing Equipment
天然石材四点抗折强度试验机
Stone cladding and paving designs depend on flexural strength measured in both three- and four-point bending. The servo-hydraulic frame delivers up to 50 kN at ±1%, holding the stress rate at 0.25 ±0.05 MPa/s. Spans adjust up to 600 mm for specimens as large as 650 × 200 × 80 mm, and results go to USB, RS232 or printer.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Stone cladding and paving designs depend on flexural strength measured in both three- and four-point bending. The servo-hydraulic frame delivers up to 50 kN at ±1%, holding the stress rate at 0.25 ±0.05 MPa/s. Spans adjust up to 600 mm for specimens as large as 650 × 200 × 80 mm, and results go to USB, RS232 or printer.
| Parameter | Value |
|---|---|
| Maximum load 最大荷载 | 50 kN |
| Load accuracy 荷载精度 | ±1% of reading |
| Loading modes 加载方式 | Three-point and four-point fixtures |
| Support span 支座跨距 | Up to 600 mm adjustable |
| Specimen size 试样尺寸 | Up to 650 × 200 × 80 mm |
| Load rate 加载速率 | 0.25 ±0.05 MPa/s, closed-loop |
| Drive 驱动 | Servo-hydraulic |
| Data output 数据输出 | USB and RS232, printer |
| Power supply 电源 | 220 V, 50 Hz |
| Standards 执行标准 | BS EN 12372, BS EN 13161 |
| Model No. | TFS-0005 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
