瓷砖抗折强度试验机
Photo for reference; configuration may vary by order.
Model No. TFS-0004 · Building Materials Testing Equipment
大规格瓷砖与岩板抗折试验机
Slabs up to 1600 × 3200 mm can't be tested whole on a standard tile bench. This floor frame spans 100–1500 mm with a 1600 mm loading roller and a servo drive delivering up to 30 kN at ±1%. Thickness from 3 to 30 mm is covered, and a long support table carries the full slab so it is not cracked during handling.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Slabs up to 1600 × 3200 mm can't be tested whole on a standard tile bench. This floor frame spans 100–1500 mm with a 1600 mm loading roller and a servo drive delivering up to 30 kN at ±1%. Thickness from 3 to 30 mm is covered, and a long support table carries the full slab so it is not cracked during handling.
| Parameter | Value |
|---|---|
| Maximum load 最大荷载 | 30 kN |
| Load accuracy 荷载精度 | ±1% of reading |
| Support span 支座跨距 | 100–1500 mm adjustable |
| Maximum slab size 最大板材尺寸 | 1600 × 3200 mm on support table |
| Slab thickness 板材厚度 | 3–30 mm |
| Drive 驱动 | Servo motor with ball screw |
| Loading roller length 加载辊长度 | 1600 mm |
| Control 控制 | Touchscreen with PC software option |
| Power supply 电源 | 380 V, 50 Hz, 3-phase |
| Weight 重量 | About 1200 kg |
| Model No. | TFS-0004 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
