食用油分析仪器
Photo for reference; configuration may vary by order.
Model No. EOA-0005 · Oil Testing Equipment
脂肪酸甲酯分析气相色谱仪
Labelling, trans fat checks and authenticity disputes all depend on a clean fatty acid profile. This GC pairs a split/splitless inlet rated to 400 °C with an FID sensitive to 1.5 pg C/s or better, typically running a 100 m × 0.25 mm × 0.20 µm cyanopropyl column. Oven programs ramp 0.1–120 °C/min, and a FAME run takes about 30–60 min.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Labelling, trans fat checks and authenticity disputes all depend on a clean fatty acid profile. This GC pairs a split/splitless inlet rated to 400 °C with an FID sensitive to 1.5 pg C/s or better, typically running a 100 m × 0.25 mm × 0.20 µm cyanopropyl column. Oven programs ramp 0.1–120 °C/min, and a FAME run takes about 30–60 min.
| Parameter | Value |
|---|---|
| Detector 检测器 | Flame ionization (FID) |
| Oven temperature range 柱温箱温度范围 | Ambient +5 to 450 °C |
| Oven ramp rate 升温速率 | 0.1–120 °C/min |
| Inlet type 进样口类型 | Split/splitless, up to 400 °C |
| FID sensitivity FID 灵敏度 | ≤ 1.5 pg C/s |
| Column (typical) 色谱柱（典型） | 100 m × 0.25 mm × 0.20 µm cyanopropyl |
| Analysis time 分析时间 | ≈ 30–60 min |
| Repeatability (RSD, peak area) 重复性（RSD，峰面积） | ≤ 1 % |
| Power supply 电源 | 220 V AC, 50 Hz |
| Model No. | EOA-0005 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
