Handheld Moisture Meter for Paper纸张手持式水分仪
- Measuring range
- 3–20% moisture content
- Resolution
- 0.1%
纸张水分测定仪

Photo for reference; configuration may vary by order.
Model No. MOT-0002 · Paper Analysis Equipment
纸张和纸板卤素水分测定仪
When the oven-dry method is too slow for routine control, a halogen analyser gives moisture in 3–10 min on 3–10 g of paper or board. The heater runs 50–200 °C with standard, rapid, step or gentle profiles and ends on a mass-loss-per-time threshold. The balance reads 1 mg, with 0.01% moisture readability.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
When the oven-dry method is too slow for routine control, a halogen analyser gives moisture in 3–10 min on 3–10 g of paper or board. The heater runs 50–200 °C with standard, rapid, step or gentle profiles and ends on a mass-loss-per-time threshold. The balance reads 1 mg, with 0.01% moisture readability.
| Parameter | Value |
|---|---|
| Balance resolution 天平分度值 | 1 mg |
| Moisture readability 水分读数分度 | 0.01% |
| Temperature range 温度范围 | 50–200 °C |
| Drying profiles 干燥程序 | Standard, rapid, step and gentle |
| Endpoint criterion 终点判据 | Mass loss per time threshold |
| Typical specimen mass 典型试样质量 | 3–10 g |
| Typical drying time 典型干燥时间 | 3–10 min |
| Data output 数据输出 | Drying curve and result print or export |
| Model No. | MOT-0002 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.