Handheld Moisture Meter for Paper纸张手持式水分仪
- Measuring range
- 3–20% moisture content
- Resolution
- 0.1%
纸张水分测定仪

Photo for reference; configuration may vary by order.
Model No. MOT-0003 · Paper Analysis Equipment
纸张水分测定用卡尔费休滴定仪
Specialty and electrical papers with very low moisture, or papers carrying solvent residues, need a method that reacts only with water. This Karl Fischer titrator heats 0.1–2 g specimens in an oven at 40–200 °C and carries the water to the cell with dry gas, resolving 0.1 µg coulometrically.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Specialty and electrical papers with very low moisture, or papers carrying solvent residues, need a method that reacts only with water. This Karl Fischer titrator heats 0.1–2 g specimens in an oven at 40–200 °C and carries the water to the cell with dry gas, resolving 0.1 µg coulometrically.
| Parameter | Value |
|---|---|
| Measurement principle 测量原理 | Karl Fischer reaction with iodine |
| Water range 水含量范围 | 10 µg to 100% depending on mode |
| Resolution 分辨率 | 0.1 µg water (coulometric) |
| Oven temperature 烘箱温度 | 40–200 °C programmable |
| Carrier gas 载气 | Dry nitrogen or air, 20–100 mL/min |
| Drift requirement 漂移要求 | Below 2 µg/min before start |
| Typical specimen mass 典型试样质量 | 0.1–2 g |
| Data output 数据输出 | Water content, drift log and curve |
| Model No. | MOT-0003 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.