聚合物分析用差示扫描量热仪
Photo for reference; configuration may vary by order.
Model No. DSCA-0006 · Polymer Analysis Equipment
工程塑料用高温差示扫描量热仪
Polyimides, composite matrices and inorganic fillers have transitions far above the reach of a standard DSC. This model reaches 1500 °C, optionally 1600 °C, using platinum or platinum-rhodium thermocouples with alumina, platinum or ceramic crucibles. Temperature accuracy is ±2 °C at 1000 °C, with argon or nitrogen purge and an oxygen option.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Polyimides, composite matrices and inorganic fillers have transitions far above the reach of a standard DSC. This model reaches 1500 °C, optionally 1600 °C, using platinum or platinum-rhodium thermocouples with alumina, platinum or ceramic crucibles. Temperature accuracy is ±2 °C at 1000 °C, with argon or nitrogen purge and an oxygen option.
| Parameter | Value |
|---|---|
| Temperature range 温度范围 | Ambient to 1500 °C (optional 1600 °C) |
| Heating rate 升温速率 | 0.1–50 °C/min |
| Temperature accuracy 温度准确度 | ±2 °C at 1000 °C |
| Calorimetric accuracy 量热准确度 | ±3% for metal standards |
| Sensor type 传感器类型 | Platinum or platinum-rhodium thermocouples |
| Sample holder material 样品支架材质 | Alumina, platinum or ceramic crucibles |
| Typical sample mass 典型样品量 | 10–50 mg |
| Atmosphere control 气氛控制 | Argon or nitrogen purge, oxygen option |
| Purge gas flow 吹扫气流量 | 20–100 mL/min |
| Cooling 冷却方式 | Forced air or water cooled furnace |
| Model No. | DSCA-0006 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
