Model No. GYC-0004
Gyratory Compactor Mould Set 150 mm旋转压实仪试模套装 150 mm
- Inside diameter
- 149.90–150.00 mm
- Height
- 250 mm
马歇尔击实仪
Marshall Compactors
Photo being updated
Photo for reference; configuration may vary by order.
Model No. MCP-0004 · Bitumen & Asphalt Testing Equipment
Large Specimen Marshall Compactor 152.4 mm
大型马歇尔击实仪 152.4 mm
Coarse base mixes cannot be compacted properly in a 101.6 mm mould. This compactor drops a 10.2 kg hammer with a 149.4 mm face through 457 mm into 152.4 mm moulds at about 60 blows/min, stopping at the preset blow count inside a guard enclosure.
- Hammer mass
- 10.2 kg
- Drop height
- 457 mm
- Tamping face
- 149.4 mm diameter
- Mould size
- 152.4 mm diameter
- Blow rate
- Approx. 60 blows/min
Packing & Shipping
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Product Description 产品描述
Coarse base mixes cannot be compacted properly in a 101.6 mm mould. This compactor drops a 10.2 kg hammer with a 149.4 mm face through 457 mm into 152.4 mm moulds at about 60 blows/min, stopping at the preset blow count inside a guard enclosure.
Highlights
- 10.2 kg hammer, 457 mm drop
- 152.4 mm moulds
- 149.4 mm tamping face
- Preset counter with guard
Applications
- Mixes with aggregate above 25 mm
- Base course asphalt design
- Large-stone asphalt research
- Labs with 100 kN Marshall testers
Specifications 技术参数
| Parameter | Value |
|---|---|
| Hammer mass 锤质量 | 10.2 kg |
| Drop height 落高 | 457 mm |
| Tamping face 击实面 | 149.4 mm diameter |
| Mould size 试模尺寸 | 152.4 mm diameter |
| Blow rate 击实频率 | Approx. 60 blows/min |
| Blow counter 击数计数 | Preset with auto stop |
| Safety 安全 | Guard enclosure |
| Power supply 电源 | 380 V, 50 Hz, 3-phase |
| Net weight 净重 | Approx. 260 kg |
| Model No. | MCP-0004 |
| Place of origin | China (dispatched from Shanghai) |
Applicable standards 适用标准
ASTM D6926
AASHTO T 245
BS EN 12697-30
ASTM D5581
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Packing & Shipping 包装与运输
Export packing
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Loading port
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Inquiry Now 索取报价
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Related products
6 models
Model No. MCP-0001
Manual Marshall Compaction Hammer with Pedestal手动马歇尔击实锤（带基座）
- Hammer mass
- 4536 ± 9 g
- Drop height
- 457 ± 1.5 mm
Model No. MCP-0002
Automatic Marshall Compactor Single Hammer单锤自动马歇尔击实仪
- Hammer mass
- 4536 ± 9 g
- Drop height
- 457 ± 1.5 mm
Model No. MCP-0003
Impact Compactor to BS EN 12697-30符合BS EN 12697-30的冲击击实仪
- Hammer mass
- 4550 ± 20 g
- Drop height
- 460 ± 3 mm
Model No. MCP-0005
Dual-Hammer Automatic Marshall Compactor双锤自动马歇尔击实仪
- Hammers
- 2, each 4536 ± 9 g
- Drop height
- 457 ± 1.5 mm
Model No. WTT-0004
Automatic Rutting Tester with Dynamic Stability Output动稳定度自动车辙试验仪
- Wheel
- Solid rubber, 200 mm diameter, 50 mm wide
- Contact pressure
- 0.7 ± 0.05 MPa