马歇尔击实仪
Photo for reference; configuration may vary by order.
Model No. MCP-0001 · Bitumen & Asphalt Testing Equipment
手动马歇尔击实锤（带基座）
Manual compaction is still common where specimen numbers are low and power is unreliable. This hammer drops 4536 ± 9 g through 457 ± 1.5 mm onto a 98.4 mm flat face, with the 101.6 mm mould clamped on a 200 × 200 × 460 mm hardwood pedestal. Three moulds with collars and base plates are supplied.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Manual compaction is still common where specimen numbers are low and power is unreliable. This hammer drops 4536 ± 9 g through 457 ± 1.5 mm onto a 98.4 mm flat face, with the 101.6 mm mould clamped on a 200 × 200 × 460 mm hardwood pedestal. Three moulds with collars and base plates are supplied.
| Parameter | Value |
|---|---|
| Hammer mass 锤质量 | 4536 ± 9 g |
| Drop height 落高 | 457 ± 1.5 mm |
| Tamping face 击实面 | 98.4 mm diameter, flat |
| Mould size 试模尺寸 | 101.6 mm diameter |
| Pedestal 基座 | Hardwood post 200 × 200 × 460 mm on steel plate |
| Mould holder 试模夹 | Spring-loaded clamp |
| Guide rod 导杆 | Hardened steel with handle |
| Moulds supplied 随机试模 | 3 moulds with collars and base plates |
| Model No. | MCP-0001 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
