平板载荷试验仪
Photo for reference; configuration may vary by order.
Model No. PLX-0001 · Geotechnical Field Testing Equipment
手动液压平板载荷试验套装 500 kN
Foundation designers often want a direct bearing test on the formation before committing to footing sizes. This set loads a 300, 450 or 600 mm plate through a 500 kN jack with 150 mm stroke and a hand pump gauged to 60 MPa. Four 0.01 mm dial gauges on a 3 m aluminium datum beam record settlement, and extension pieces reach a reaction 1.2 m above the plate.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Foundation designers often want a direct bearing test on the formation before committing to footing sizes. This set loads a 300, 450 or 600 mm plate through a 500 kN jack with 150 mm stroke and a hand pump gauged to 60 MPa. Four 0.01 mm dial gauges on a 3 m aluminium datum beam record settlement, and extension pieces reach a reaction 1.2 m above the plate.
| Parameter | Value |
|---|---|
| Jack capacity 千斤顶容量 | 500 kN |
| Jack stroke 千斤顶行程 | 150 mm |
| Pump 油泵 | Hand pump with pressure gauge, 0–60 MPa |
| Bearing plates 承压板 | 300, 450 and 600 mm diameter, 25 mm thick |
| Dial gauges 百分表 | 4 × 0–50 mm, 0.01 mm |
| Datum beam 基准梁 | Aluminium, 3 m with magnetic holders |
| Ball seating 球座 | Hardened steel, self-aligning |
| Extension pieces 加长柱 | Set to 1.2 m |
| Standards 执行标准 | IS 1888, BS 1377-9 |
| Weight 重量 | About 210 kg |
| Model No. | PLX-0001 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
