洗板机
Photo for reference; configuration may vary by order.
Model No. MIW-0001 · Microplate Equipment
手动洗板歧管
Teaching labs and teams running only a few ELISA plates a week can wash by hand with a vacuum manifold. Choose 8, 12 or 16 channels in stainless steel or PTFE tubing, fed by gravity or a pressurised reservoir. It needs −30 to −60 kPa vacuum and leaves about 5–10 µL per well, depending on technique.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Teaching labs and teams running only a few ELISA plates a week can wash by hand with a vacuum manifold. Choose 8, 12 or 16 channels in stainless steel or PTFE tubing, fed by gravity or a pressurised reservoir. It needs −30 to −60 kPa vacuum and leaves about 5–10 µL per well, depending on technique.
| Parameter | Value |
|---|---|
| Channels 通道数 | 8, 12 or 16 |
| Plate format 孔板规格 | 96-well |
| Wash volume 洗涤体积 | 200–350 µL/well (operator set) |
| Residual volume 残留体积 | 5–10 µL/well (technique dependent) |
| Vacuum requirement 真空要求 | −30 to −60 kPa |
| Tube material 管路材质 | Stainless steel or PTFE |
| Buffer supply 缓冲液供应 | Gravity or pressurized reservoir |
| Wash time per plate 每板洗涤时间 | 1–3 min per cycle (manual) |
| Power requirement 电源要求 | None (vacuum pump separate) |
| Waste collection 废液收集 | 1–2 L trap bottle |
| Model No. | MIW-0001 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
