洗板机
Photo for reference; configuration may vary by order.
Model No. MIW-0005 · Microplate Equipment
细胞检测用温和吸液洗板机
Adherent monolayers peel off under a standard washer's flow. This model dispenses slowly, from 2 to 50 µL/s, and aspirates at a height set in 0.1 mm steps, leaving 5–20 µL so cells never dry. Tubing is autoclavable, with ethanol flush and an optional UV lamp, and a heater can warm buffer to 37 °C.
| Place of origin | China (dispatched from Shanghai) |
|---|---|
| Brand | Liquid International / OEM on request |
| Export packing | Fumigation-free plywood case or reinforced carton |
| Loading port | Shanghai / Ningbo (others on request) |
| Payment terms | T/T, L/C at sight (confirmed on quotation) |
| Trade terms | EXW, FOB, CFR, CIF, DAP |
Typical export terms — final terms are confirmed on the proforma invoice.
Adherent monolayers peel off under a standard washer's flow. This model dispenses slowly, from 2 to 50 µL/s, and aspirates at a height set in 0.1 mm steps, leaving 5–20 µL so cells never dry. Tubing is autoclavable, with ethanol flush and an optional UV lamp, and a heater can warm buffer to 37 °C.
| Parameter | Value |
|---|---|
| Plate format 孔板规格 | 96- and 384-well |
| Dispense flow rate 分液流速 | 2–50 µL/s adjustable |
| Dispense volume 分液体积 | 10–300 µL/well |
| Aspiration height 吸液高度 | Programmable, 0.1 mm steps |
| Residual volume 残留体积 | 5–20 µL/well (programmable) |
| Fluid path 流路 | Sterilizable, autoclavable tubing |
| Sterilization 灭菌 | 70% ethanol flush; UV option |
| Buffer temperature 缓冲液温度 | Ambient to 37 °C (optional heater) |
| Cycle time (1 wash) 循环时间（一次洗涤） | 30–90 s per plate |
| Footprint 占地尺寸 | ≤ 40 × 40 cm (BSC compatible) |
| Model No. | MIW-0005 |
| Place of origin | China (dispatched from Shanghai) |
Chinese national standards (GB/T, JJG) and international standards referenced for this product type. Test reports and certificates are supplied with the quotation on request.
Fumigation-free plywood case or reinforced carton
Every unit is power-tested before packing; enclosed in shock foam and moisture barrier; wooden cases comply with ISPM 15.
Shanghai / Ningbo (others on request)
Full container load (FCL), less-than-container load (LCL) or air freight; complete export documentation provided.
Complete the form below — an export engineer will send technical configurations and a formal proforma invoice within 24 hours.
Single instruments, complete laboratories or government tenders — our export engineers prepare the configuration, proforma invoice and shipping documents.
